Product information

Specification

Approvals

• This composition meets the criteria for not being harmful to the marine environment according to MARPOL Annex V and may be discharged into the sea when used to clean cargo holds and external surfaces on ships.
• Approved by Marinfloc AB for use in engine rooms
• Nordic Swan eco-labelled.

Directions for use

General Cleaning - Deck and Engine Room
Unitor™ Aquatuff™ can be used for different types of cleaning, and it can be applied by brush, hand spray, high- and low pressure washing machines etc. It can be applied on vertical surfaces by adding Unitor™ Foam-Agent™ (Product no. 614537) for increased resident time.
Dependent on degree of contamination typical dosage is about 1-5%.
For safe handling and optimal dilution we recommend the use of the UNITOR™ MIXING STATION 4-14.

Removal of soot from Inert Gas Systems (IGS)

1. Apply Unitor™ Aquatuff™ with a Unitor™ High Pressure Cleaning Machine and use 1:4 with water. However, if used with a hand sprayer, apply the product neat on the surfaces, allowing 1 litre per 12m2.
2. Leave for about 30-45 minutes. The surface remains wet.
3. Wash down with hot water (80°C) and check the results.
4. Repeat the procedure if necessary.

Cargo hold cleaning
Unitor™ Aquatuff™ can be used for cargo hold cleaning after soot, coal, pet coke and other bulk materials.

**
**

Dosing method

1. For best foaming abilities use Unitor™ Foam Agent in conjunction with Aquatuff
2. Apply Unitor™ Aquatuff™ mixed 20% in water, using the Unitor™ Cargo hold Cleaning kits and its foam nozzle.
3. Leave for 10--15 minutes. The surface remains wet.
4. Wash down with Tornado 3 water jet. For best results, direct the water jet at the lowest parts of the hold first and work upwards.
5. Repeat the procedure if necessary.

产品特性

• 强效水溶性的碱性清洁剂

• 不含壬基苯酚、聚乙氧基醇或相关激素成分

• 可生物降解

• 非碳氢化合物溶液

• 可除去惰性气体系统的烟垢沉积物

• 它有许多清洁应用，包括去除油脂，植物和动物油，烟灰和一般污垢和污垢

• Marinfloc AB 认证可使用于机舱

优势

• 去除惰性气体系统中的烟灰沉积物

• 使用有效且经济

• 环氧涂料完全安全

订购信息

Product number                           Product name

607826                                       AQUATUFF 25 LTR

认证

• 根据MARPOL附则V，该组合物符合不对海洋环境有害的标准，并且当用于清洁货舱和船舶外表面时可以排入海中。

• Marinfloc AB 认证可使用于机舱

使用说明

一般清洗

Unitor™ Aquatuff™ 可用于所有类型的清洁和去油，它可用于刷洗、手工喷洗、高压和低压洗舱机等多种方法。在洗垂直的舱璧时，请添加Wilhelmsen Foam-Agent (产品编号651 614537)(请参考附注)，以增加Aquatuff在垂直面上的吸附时间。

清洗惰性气体系统的烟垢(IGS)

1. 使用高压清洗机将1:4 的Aquatuff 水溶液喷射其上，如果用手提式喷枪，则将纯液（不需稀释）喷射到表面上，每12 平方米面积使用Aquatuff1 公升。.

2. 留置约30-40 分钟，表面要保持湿润。.

3. 用热水（80°C）彻底冲洗干净，并检查货舱使否干净。.

4. 必要时重复以上操作。

货舱清洗

UNITOR™Aquatuff™可用于烟灰，煤炭，石油焦等大宗材料后货舱清洁。

加药方式

1. 使用喷雾泡沫设备将Unitor™Aquatuff™混合10-25％（比例1：9至1：3）混合在水中。

2. 留置约30-40 分钟，表面要保持湿润。

3. 用高压装置冲洗。为获得最佳效果，请先将高压射流引导至货舱的最低部位，然后再向上工作。

4. 必要时重复以上操作。

如果在装载之前将Unitor™Slip-Coat™（产品编号652737015和652 737023）应用于货舱表面，则可降低清洁溶液中Unitor™Aquatuff™的浓度。

将Unitor™Aquatuff™与海水混合时，需要考虑以下因素：

1. 海水可能会降低洗涤剂的发泡质量

2. 海水可能会影响清洁溶液的pH值，从而降低清洁效果

3. 海水表示腐蚀风险的表面和所用的设备