571513 ALKLEEN SAFETY LIQ 25 LTR

Unitor™ Alkleen Safety Liquid™ 25 l is a non-caustic water based alkaline cleaner, containing corrosion inhibitors to prevent the corrosion of metals such as zinc, aluminium, copper, brass and tin. 非腐蚀性水基碱性清洁剂，含有腐蚀抑制剂，可防止锌，铝，铜，黄铜和锡等金属的腐蚀。Unitor™ Alkleen Safety Liquid™可最大限度地减少处理腐蚀性材料的危险。

产品分类：

船用化学品 Marine Chemicals

清洁剂船用化学品 Cleaning Chemicals

关键字：

船用泵、船用气动工具、船用工作间设备

在线留言

联系我们

产品详情

Product information

Unitor™ Alkleen Safety Liquid™ minimises the hazards in handling caustic based materials.

Features

Non-caustic
Non-flammable
Does not contain nonyl phenol ethoxylates or other estrogenic compounds
Non-corrosive to ferrous metals
IMO approved and listed in Annex 10 of the MEPC.2/ Circular

Benefits

Suitable for all tank-coatings
Can be used for gas and hydrocarbon-freeing of tanks
Can be used for deodorizing
Safe, meets current regulation

Specification

General

Invent Hazard Material (IMO/EU) classification	C-49

Physical properties

Appearance	Colourless
Density [g/ml]	1,1
Form	Liquid
pH	13

Technical data

Not Compatible	The concentrated product may react with aluminium, zinc, tin and their alloys.

Performance data

Pump Speed [cpm]

Variants

Product name	Product number
ALKLEEN SAFETY LIQ 210 LTR	571521 (supersedes 602862)
ALKLEEN SAFETY LIQ 25 LTR	571513

Approvals

Unitor™ Alkleen Safety Liquid™ has been evaluated by the BLG Working Group on the Evaluation of Safety and Pollution Hazards of Chemicals (ESPH) and found to meet the requirements of paragraph 13.5.2 of the MARPOL Annex II and is consolidated into annex 10 of the MEPC.2/Circular.

Directions for use

Cargo tank cleaning following discharge of drying, semi-drying and non drying natural oils and fats.
As soon as possible after the cargo has been discharged, the tanks should be flushed with cold water to prevent polymerisation and evaporation of the lighter oil fractions.

Whenever possible, the cleaning solution should be heated to 60-80°C. However, the polymerising nature of some natural oils may demand lower cleaning temperatures.

Dosing method The most economical method of using Unitor™ Alkleen Safety Liquid™ is by direct injection followed by recirculation washing, using tank cleaning machines. If this method is not possible, hand spraying provides acceptable options. Refer to dosage table for dosage rates.

Cargo Residue	Hand Spray	Recirculation	Direct Injection	*Approx. recirculation consumption, litres per 1000 m3 tank space
Fatty acids, fatty alcohols Fish oils	100%	3-5%	2-4%	180-300
Drying & Semi drying	100%	3-5%	2-4%	180-300
Vegetable oil	50-100%	2-4%	1-3%	120-240
Non drying vegetable oil	50-100%	2-4%	1-3%	120-240

*When using the recirculation method, the tank to be cleaned is filled with water to a level that the heating coils are covered. As an average, this is approximately 0.6% of the volume of the tank. The figures mentioned in this column are the quantity of Unitor™ Alkleen Safety Liquid™ required to obtain the recommended solution strengths.

产品特性

• 非腐蚀

• 非易燃

• 不含壬基酚乙氧基化物或其他雌激素化合物

• 对黑色金属无腐蚀性

• IMO批准并列入MEPC.2 / Circular的附件10

优势

• 适用于所有舱用涂料

• 可用于储罐的气体和碳氢化合物

• 可用于除臭

• 安全且符合现行法规

订购信息