777702 CONDENSATE TREATMENT 9-150 25 LTR

NALFLEET™ Condensate Treatment 9-150™ is a liquid blend of neutralising amines applied for the protection of steam and condensate pipework. NALFLEET™ Condensate Treatment 9-150™是一种中和胺的液体混合物，用于保护蒸汽和冷凝水管道。

产品分类：

船用化学品 Marine Chemicals

锅炉水处理剂船用化学品 Bolier Water Treat

关键字：

船用泵、船用气动工具、船用工作间设备

在线留言

联系我们

产品详情

Product information

This product supersedes product no: 777032, , 9-150.11U

Features

Provides effective protection of steam & condensate systems against corrosive attack by carbon dioxide & other acidic gases
Reduces pickup of iron and copper in condensate as a result of corrosion suppression reliability

Benefits

Extends the life of steam and condensate systems giving reducing maintenance costs and less down time
Using it with an oxygen scavenger gives a balanced control programme for increased plant reliability

Specification

General

Invent Hazard Material (IMO/EU) classification	C-9

Physical properties

Density [g/ml]	0.98
Flash Point [°C]	57C
Form	Liquid
Freezing Point [°C]	-8
Materials compatibility	; Stainless Steel, Polyethylene, Polypropylene, Teflon.
pH	12.0

Technical data

Not Compatible	Aluminium, Copper, Brass, Fiberglass, Galvanised Steel (Zinc), Viton, Hypalon.

Directions for use

NALFLEET™ Condensate Treatment 9-150 is a neutralising type corrosion inhibitor for the use in steam and steam condensate systems. NALFLEET™ Condensate Treatment can be used at boiler operating pressures up to 165 bar.

Dosing Method
NALFLEET™ Condensate Treatment 9-150 should be injected on a continuous basis. For continuous addition (advisable when used in conjunction with an oxygen scavenger), a suitable chemical proportioning pump is required.

Sampling and Testing
A representative sample of condensate should be drawn for analysis daily. The sample should always be taken from the same point, cooled and tested immediately. Follow the test kit instructions and log the results in Waterproof. The results should be sent to WSS as stated in the Waterproof instructions.

Dosing and Control
The dosage of NALFLEET™ Condensate Treatment 9-150 required for regular treatment will depend primarily upon the carbon dioxide content of the condensate. Typical dose rate is 10mls/tone steam. It should be injected on a continuous basis to maintain the pH of the condensate at the main condensate pump discharge of 8.5 -- 9.2 or to maintain a "p" alkalinity of 4-8ppm. NALFLEET™ Condensate treatment 9-150 may be dosed neat or diluted with cooled condensate or distilled water. It should never be fed to the surface of hot water in a boiler feed tank, but should be fed below the surface.

产品特性

• 为蒸汽和冷凝系统提供有效保护，防止二氧化碳腐蚀其他酸性气体

• 由于腐蚀抑制可靠性，减少冷凝水中铁和铜的吸收

优势

• 延长蒸汽和冷凝系统的使用寿命，降低维护成本，减少停机时间

• 与氧气清除剂一起使用可提供平衡的控制程序，以提高药性的可靠性

Product Number Product name

777702 CONDENSATE TREATMENT 9-150 25 LTR

使用说明

NALFLEET™ Condensate Treatment 9-150 是一种中和型缓蚀剂，适用于蒸汽和蒸汽冷凝系统。NALFLEET™ Condensate Treatment 可用于锅炉工作压力高达165bar。

加药方法

NALFLEET™ Condensate Treatment 9-150 应连续注入。对于连续添加（建议与氧气清除剂配合使用时），需要使用合适的化学配比泵。