Directions for use

Unitor™ Disclean™ may be used neat or diluted down to 20% by volume with fresh water, depending on the severity of contamination, availability of heat and time to complete cleaning operation. The higher the concentration the more efficient the cleaning action.

The time for a cleaning operation will vary from 30 minutes to maximum 2 hours depending on the above factors. Faster and more efficient cleaning can be accomplished by heating to a maximum temperature of 60 °C.

After the unit or parts have been satisfactorily cleaned, they shall be rinsed thoroughly with fresh water to remove all traces of contamination and Unitor™ Disclean™.

Method of cleaning Separators can be cleaned by:

1. Removing the separator disc stack and soaking in a solution of Unitor™ Disclean. Circulating the solution and heating will enhance the cleaning.
2. Removing the separator discs and dismantling stack, then soaking discs in Unitor™ Disclean. Circulating and heating the solution will enhance the cleaning. Discs can be sprayed if soaking tank is not available.

产品特性

• 含有表面活性剂的酸性产品

• 不含壬基酚乙氧基化物或其他雌激素化合物

• 非易燃

• 去除沉重的顽固沉积物

• 清洁金属表面

• 允许清洁光盘而无需拆除光盘堆栈

• 清洁所有类型的分离盘

• Marinfloc AB批准用于机舱

优势

• 不留下薄膜或残留物

• 减少系统停机时间

建议不要在锌，锡，镀锌表面或阳极氧化铝上使用本产品。

The Unitor™ Chemical Cleaning Unit (Product no. 664 737189) 可用于圆盘堆的浸泡清洁

订购信息

Product number          Product name

571687                  DISCLEAN 25 LTR

使用说明

Unitor™Disclean™可根据污染的严重程度，热量的可用性和完成清洁操作的时间，用淡水或稀释至20％（体积）的淡水使用。浓度越高，清洁作用越有效。

根据上述因素，清洁操作的时间从30分钟到最多2小时不等。通过加热到最高温度，可以实现更快，更有效的清洁60°C。

在对装置或部件进行了令人满意的清洁后，应用清水彻底冲洗，以清除所有污染痕迹和Unitor™Disclean™。

清洁方法可以通过以下方式清洁分离器：

1. 取下分离器盘迭并浸泡在Unitor™Disclean溶液中。循环溶液和加热将增强清洁效果。

2. 取下分离盘并拆卸堆栈，然后将盘浸入Unitor™ Disclean中。循环和加热溶液将增强清洁效果。

如果没有浸泡槽，可以喷射圆盘。