335547 ICUNI-30 239 2.5 X 500 MM 2,0KG

TIG welding rod for cunifer pipes.

产品分类：

船用电焊气焊配件 Welding

关键字：

船用泵、船用气动工具、船用工作间设备

在线留言

联系我们

产品详情

Product information

Copper-Nickel type welding rod for welding seawater resistant copper nickel alloys, e.g.types Cu Ni 10 and Cu Ni 30, known as Cunifer alloys, which are frequently used in seawater cooling systems. No flux is needed, but joint surfaces and adjacent areas must be thoroughly cleaned. Use pure argon as shielding gas for TIG welding.

Features

High mechanical strength and toughness
High content of nickel

Benefits

Less possibility for joint failure during operation
Large working area- can be used on Cunifer 10 and 30

Specification

General

Invent Hazard Material (IMO/EU) classification	NA

Dimensions/Weight

Diameter [mm]	2.5
Length [mm]	500
Weight [kg]	2.0

Directions for use

DC - polarity when welding. The label on each container fully identifies the contents, and also gives basic information on application areas. Complete information on each flux label, and instructions for use are given in the handbook for maritime welders.

相关产品